Goodwood Style – Slot Car Scenics

Goodwood Style Paling Fence Ultimate pack

Owner — Fri, 15 Feb 2019 14:07:26 +0000

Goodwood Style Paling Fence Ultimate pack

Ideal for anyone wanting to setup a Goodwood style layout in a 1960’s theme or to replace lost or broken Scalextric A225 or A226 sections.

Enhance your scalextric or slotcar layout with these 3d printed fences and gate section.

Fence off paddock areas, pit lanes, spectator enclosures, static displays etc. Many Uses.

Could also be used for dioramas and such like.

This Ultimate Pack consists of :

4x 3D Printed Goodwood Style Paling picket fence pieces (A225 replica) with feet for Scalextric and slot car scenery approx 1:32 scale.
1x 3D Printed Goodwood Style Paling picket fence Gate section (A226 replica) with feet for Scalextric and slot car scenery approx 1:32 scale.
1x 3D Printed Goodwood Style Starter Rostrum (F303 replica) 1:32 scale.

We have drawn these up in CAD software using measurements from the original Scalextric A225 and A226 and F303 parts and then 3D printed.
As such they can be used along side the originals but ours are a lot brighter / whiter that the 60`s originals.We sell these things individual too, see our other Products.
3D printed in White plastic so no need to paint if you don’t want to, however can be painted if needed with simple Acrylic hobby paints.

Each fence section measure approx 180 x 45 x 20mm (WxHxD)

Gate section Measures approx 185 x 60 x 20mm (WxHxD)

Starter Rostrum Measures Approx 50 x 65 x 60mm (WxHxD)

Please note that 3d printed parts will have visible layer lines.

These can be sanded before painting if needed.

I personally dont bother painting them and they look good around my track, see some of the pictures.
NOTE: all figures, cars, track etc are NOT included, only 4x fence sections, 1x Gate Set and 1x Starter Rostrum shown in main photo.

Goodwood style Starter Rostrum – Scalextric F303 replica – 1/32 scale

Owner — Fri, 15 Feb 2019 13:59:03 +0000

Goodwood style Starter Rostrum – Scalextric F303 replica – 1/32 scale

1x 3D Printed Goodwood style Starter Rostrum, replica of F303 for Scalextric and slot car scenery approx 1:32 scale.

Supplied fully assembled and plain white unpainted.

Ideal for anyone wanting to setup a Goodwood style layout in a 1960’s theme or to replace lost or broken Scalextric F303.

Enhance your scalextric or slotcar layout with this 3d printed Starter / Marshall Rostrum.

Could also be used for dioramas and such like.

We have drawn this up in CAD software using measurements from the original Scalextric F303 and then 3D printed.

As such it can be used along side the originals but ours is a lot brighter / whiter that the 60`s originals.

3D printed in White plastic so no need to paint if you don’t want to, however can be painted if needed with simple Acrylic hobby paints.

Measures approx 50 x 65 x 60mm (WxHxD)

Please note that 3d printed parts will have visible layer lines. These can be sanded before painting if needed.

I personally dont bother painting them and they look good around my track, see some of the pictures.

NOTE: all figures, cars, track etc are NOT included, only 1x Starter Rostrum shown in main picture.

Goodwood Style Paling Fence Gate Set – 1/32 scale

Owner — Fri, 15 Feb 2019 13:54:27 +0000

Goodwood Style Paling Fence Gate Set – 1/32 scale

1x 3D Printed picket paling fence Gate section with feet for Scalextric and slot car scenery approx 1:32 scale.

Comprised of 1x gate, 2x gate posts, 2x feet (push or glue on).

This also links to the Picket / Paling fence sections that we also sell.

Ideal for anyone wanting to setup a Goodwood style layout in a 1960’s theme or to replace lost or broken Scalextric A226 section.
Enhance your Scalextric or slotcar layout with this 3d printed Gate Set.
Fence off paddock areas, pit lanes, spectator enclosures, static displays etc. Many Uses.

Could also be used for dioramas and such like.

We have drawn this up in CAD software using measurements from the original Scalextric A226 and then 3D printed.
As such it can be used along side the originals but mine is a lot brighter / whiter that the 60`s originals.

3D printed in White plastic so no need to paint if you don’t want to, however can be painted if needed with simple Acrylic hobby paints.

Measures approx 185 x 60 x 20mm (WxHxD)

Please note that 3d printed parts will have visible layer lines. These can be sanded before painting if needed.
I personally dont bother painting them and they look good around my track, see some of the pictures.
NOTE: all figures, cars, track etc are NOT included, only 1x Gate set comprising of 3 sections shown in main picture.

Goodwood Style Paling Fence pack of 4 plus Gate Set

Owner — Fri, 15 Feb 2019 11:49:19 +0000

Goodwood Style Paling Fence pack of 4 plus 1x Gate set

Pack of four 3D Printed picket / paling fence sections with push on feet for Scalextric and slot car scenery plus 1 gate section approx 1:32 scale.

Ideal for anyone wanting to setup a Goodwood style layout in a 1960’s theme or to replace lost or broken Scalextric A225 and A226 sections.

Enhance your scalextric or slotcar layout with these 3d printed fence sections.

Fence off paddock areas, pit lanes, spectator enclosures, static displays etc. Many Uses.

Could also be used for dioramas and such like.

We have drawn these up in CAD software using measurements from the original Scalextric A225 and A226 sections and then 3D printed them .

As such they can be used along side the originals but ours are a lot brighter / whiter that the 60`s originals.

3D printed in White plastic so no need to paint if you don’t want to, however can be painted if needed with simple Acrylic hobby paints.

What you will receive:

4x Goodwood Style Paling Fence Sections – 1/32 scale
1x Goodwood Style Gate Section – 1/32 scale
Each fence section measure approx 180 x 45 x 20mm (WxHxD)
The Gate section measures approx 185mm x 60mm x 20mm (WxHxD)

Please note that 3d printed parts will have visible layer lines. These can be sanded before painting if needed.

I personally dont bother painting them and they look good around my track, see some of the pictures.

NOTE: all figures, cars, track etc are NOT included, only 2x fence sections as shown in main picture.

Goodwood Style Paling Fence pack of 4

Owner — Fri, 15 Feb 2019 11:45:32 +0000

Goodwood Style Paling Fence pack of 4

Pack of four 3D Printed picket / paling fence sections with push on feet for Scalextric and slot car scenery approx 1:32 scale.

Ideal for anyone wanting to setup a Goodwood style layout in a 1960’s theme or to replace lost or broken Scalextric A225 sections.

Enhance your scalextric or slotcar layout with these 3d printed fence sections.

Fence off paddock areas, pit lanes, spectator enclosures, static displays etc. Many Uses.

Could also be used for dioramas and such like.

We have drawn these up in CAD software using measurements from the original Scalextric A225 sections and then 3D printed.

As such they can be used along side the originals but ours are a lot brighter / whiter that the 60`s originals.

3D printed in White plastic so no need to paint if you don’t want to, however can be painted if needed with simple Acrylic hobby paints.

What you will receive:

4x Goodwood Style Paling Fence Sections – 1/32 scale
Each section measure approx 180 x 45 x 20mm (WxHxD)

Please note that 3d printed parts will have visible layer lines. These can be sanded before painting if needed.

I personally dont bother painting them and they look good around my track, see some of the pictures.

NOTE: all figures, cars, track etc are NOT included, only 2x fence sections as shown in main picture.

Goodwood Style Paling Fence pack of 2

Owner — Fri, 15 Feb 2019 11:43:01 +0000

Goodwood Style Paling Fence pack of 2

Pack of two 3D Printed picket / paling fence sections with push on feet for Scalextric and slot car scenery approx 1:32 scale.

Ideal for anyone wanting to setup a Goodwood style layout in a 1960’s theme or to replace lost or broken Scalextric A225 sections.

Enhance your scalextric or slotcar layout with these 3d printed fence sections.

Fence off paddock areas, pit lanes, spectator enclosures, static displays etc. Many Uses.

Could also be used for dioramas and such like.

We have drawn these up in CAD software using measurements from the original Scalextric A225 sections and then 3D printed.

As such they can be used along side the originals but ours are a lot brighter / whiter that the 60`s originals.

3D printed in White plastic so no need to paint if you don’t want to, however can be painted if needed with simple Acrylic hobby paints.

What you will receive:

2x Goodwood Style Paling Fence Sections – 1/32 scale
Each section measure approx 180 x 45 x 20mm (WxHxD)

Please note that 3d printed parts will have visible layer lines. These can be sanded before painting if needed.

I personally dont bother painting them and they look good around my track, see some of the pictures.

NOTE: all figures, cars, track etc are NOT included, only 2x fence sections as shown in main picture.